Polyacrylic acid/polyaniline composite as efficient adsorbent for uranium extraction from nuclear industrial effluent

Journal of Radioanalytical and Nuclear Chemistry - Polyacrylic acid/polyaniline composite (a three-dimensional cross-linked hydrophilic chelating polymeric sorbent) was improved for promoted...     

Thermal dry reforming of methane over La2O3 co-supported Ni/MgAl2O4 catalyst for hydrogen-rich syngas production

Research on Chemical Intermediates - The excess emission of greenhouse gases (GHGs) such as CO2 and CH4 is posing an acute threat to the environment, and efficient ways are being sought to utilize...     

Electrochemical preparation of α-Ni(OH)2 ultrafine nanoparticles for high-performance supercapacitors

Well-dispersed nanoparticles of nickel hydroxide were prepared via a simple electrochemical method. Electrodeposition experiments were performed from 0.005 M Ni(NO₃)₂ bath at a constant current density of 0.1 mA cm^?2 on the steel cathode for 1 h. Recording the potential values during the deposition process revealed that the reduction of water has major role in the base electrogeneration at the applied conditions. The obtained deposit was characterized by the X-ray diffraction (XRD), infrared (IR), differential scanning calorimeter–thermogravimetric analysis, carbon–nitrogen–hydrogen (CHN), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) techniques. The CHN, XRD, and IR analyses showed that the obtained deposit has α phase of Ni(OH)₂ with intercalated nitrate ions in its structure. Morphological characterization by SEM and TEM revealed that the prepared α-Ni(OH)₂ is composed of well-dispersed ultrafine particles with the size of about 5 nm. The supercapacitive performance of the prepared nanoparticles was analyzed by means of cyclic voltammetry and galvanostatic charge–discharge tests. The electrochemical measurements showed an excellent supercapacitive behavior of the prepared α-Ni(OH)₂ nanoparticles. It was also observed that the α-Ni(OH)₂ ultrafine particles have better electrochemical characteristic and supercapacitive behavior than β-Ni(OH)₂ ultrafine nanoparticles, including less positive charging potential, lower E _a???E _c value, better reversibility, higher E _OER???E _a, higher utilization of active material, higher proton diffusion coefficient, greater discharge capacity, and better cyclability. These results make the α-Ni(OH)₂ nanoparticles as an excellent candidate for the supercapacitor materials.     

Dye and its removal from aqueous solution by adsorption: A review

In this review article the authors presented up to-date development on the application of adsorption in the removal of dyes from aqueous solution. This review article provides extensive literature information about dyes, its classification and toxicity, various treatment methods, and dye adsorption characteristics by various adsorbents. One of the objectives of this review article is to organise the scattered available information on various aspects on a wide range of potentially effective adsorbents in the removal of dyes. Therefore, an extensive list of various adsorbents such as natural materials, waste materials from industry, agricultural by-products, and biomass based activated carbon in the removal of various dyes has been compiled here. Dye bearing waste treatment by adsorption using low cost alternative adsorbent is a demanding area as it has double benefits i.e. water treatment and waste management. Further, activated carbon from biomass has the advantage of offering an effected low cost replacement for non-renewable coal based granular activated carbon provided that they have similar or better adsorption on efficiency. The effectiveness of various adsorbents under different physico-chemical process parameters and their comparative adsorption capacity towards dye adsorption has also been presented. This review paper also includes the affective adsorption factors of dye such as solution pH, initial dye concentration, adsorbent dosage, and temperature. The applicability of various adsorption kinetic models and isotherm models for dye removal by wide range of adsorbents is also reported here. Conclusions have been drawn from the literature reviewed and few suggestions for future research are proposed.     

Ion-Pair LC Method for Simultaneous Determination of Aliskiren Hemifumarate,Amlodipine Besylate and Hydrochlorothiazide in Pharmaceuticals

A rapid and precise LC method was developed for the simultaneous determination of aliskiren hemifumarate (ALS), amlodipine besylate (AML) and hydrochlorothiazide (HCZ) using acetonitrile:25 mM octane sulfonic acid sodium salt monohydrate in water (60:40 v/v) as the mobile phase. The flow rate was maintained at 1.2 mL min^?1 on a stationary phase composed of Supelco, Discovery^® HS (C18) column (25 cm × 4.6 mm, 5 μm). Isocratic elution was applied throughout the analysis. Detection was carried out at λ _max (232 nm) at ambient temperature. The method was validated according to ICH guidelines. Linearity, accuracy and precision were satisfactory over the concentration ranges of 32–320, 2–44 and 4–64 μg mL^?1 for ALS, AML and HCZ, respectively. LOD and LOQ were estimated and found to be 0.855 and 2.951 μg mL^?1, respectively, for ALS, 0.061 and 0.202 μg mL^?1, respectively, for AML as well as 0.052 and 0.174 μg mL^?1, respectively, for HCZ. The method was successfully applied for the determination of the three drugs in their co-formulated tablets. The results were compared statistically with reference methods and no significant difference was found. The developed method is specific and accurate for the quality control and routine analysis of the cited drugs in pharmaceutical preparations.     

Phase diagrams in mixed spin-3/2 and spin-2 Ising system with two alternative layers within the effective-field theory

The phase diagrams in the mixed spin-3/2 and spin-2 Ising system with two alternative layers on a honeycomb lattice are investigated and discussed by the use of the effective-field theory with correlations. The interaction of the nearest-neighbour spins of each layer is taken to be positive (ferromagnetic interaction) and the interaction of the adjacent spins of the nearest-neighbour layers is considered to be either positive or negative (ferromagnetic or anti-ferromagnetic interaction). The temperature dependence of the layer magnetizations of the system is examined to characterize the nature (continuous or discontinuous) of the phase transitions and obtain the phase transition temperatures. The system exhibits both second-and first-order phase transitions besides triple point (T P ), critical end point (E), multicritical point (A), isolated critical point (C) and reentrant behaviour depending on the interaction parameters. We have also studied the temperature dependence of the total magnetization to find the compensation points, as well as to determine the type of behaviour, and N-type behaviour in N′eel classification nomenclature existing in the system. The phase diagrams are constructed in eight different planes and it is found that the system also presents the compensation phenomena depending on the sign of the bilinear exchange interactions.     

On constructing total orders and solving vector optimization problems with total orders

In this paper, we introduce a construction method of total ordering cone on \mathbbRⁿ{\mathbb{R}^n} . It is shown that any total ordering cone on \mathbbRⁿ{\mathbb{R}^n} is isomorphic to the cone \mathbbRⁿ_lex{\mathbb{R}^n_{lex}} . Existence of a total ordering cone that contain given cone with a compact base is shown. By using this cone, a solving method of vector and set valued optimization problems is presented.     

A collocation approach for the numerical solution of certain linear retarded and advanced integrodifferential equations with linear functional arguments

This article presents a Taylor collocation method for the approximate solution of high‐order linear Volterra‐Fredholm integrodifferential equations with linear functional arguments. This method is essentially based on the truncated Taylor series and its matrix representations with collocation points. Some numerical examples, which consist of initial and boundary conditions, are given to show the properties of the technique. © 2009 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2011     

An efficient computational method for a stochastic dynamic lot-sizing problem under service-level constraints

We provide an efficient computational approach to solve the mixed integer programming (MIP) model developed by Tarim and Kingsman [8] for solving a stochastic lot-sizing problem with service level constraints under the static-dynamic uncertainty strategy. The effectiveness of the proposed method hinges on three novelties: (i) the proposed relaxation is computationally efficient and provides an optimal solution most of the time, (ii) if the relaxation produces an infeasible solution, then this solution yields a tight lower bound for the optimal cost, and (iii) it can be modified easily to obtain a feasible solution, which yields an upper bound. In case of infeasibility, the relaxation approach is implemented at each node of the search tree in a branch-and-bound procedure to efficiently search for an optimal solution. Extensive numerical tests show that our method dominates the MIP solution approach and can handle real-life size problems in trivial time.     

A unified three point approximating subdivision scheme

In this paper,we propose a three point approximating subdivision scheme,with three shape parameters,that unifies three different existing three point approximating schemes.Some sufficient conditions for subdivision curve C0 to C3 continuity and convergence of the scheme for generating tensor product surfaces for certain ranges of parameters by using Laurent polynomial method are discussed.The systems of curve and surface design based on our scheme have been developed successfully in garment CAD especially for clothes modelling.